Apogee Cables


Apogee Wyde Eye Cable

Apogee’s premium Wyde Eye cable offers superior connectivity and uncompromised quality for Word Clock, AES, S/PDIF and Analog formats.

  • Low capacitance for minimum pulse degradation
  • Carefully controlled impedance accurately matches terminations
  • Low dimensional discontinuities for consistent impedance
  • Optimum dielectric -- foamed high-density polyethylene
  • Maintains properties over the full temperature range
  • Flexible -- supple outer jacket in distinctive purple

WE-RR

 

Use With:
BIG BEN, Ensemble,

Mini-DAC, ROSETTA 200

 

Available in the

Apogee Store>

CABLE: S/PDIF
FORMAT: S/PDIF

 

Description:
Coaxial 75 Ohm S/PDIF connection using Apogee’s acclaimed Wyde Eye cable for 2 channels of digital I/O and clock signals. S/PDIF supports 2 channels of digital audio at sample rates up to 192kHz.

Application:
Any digital device connection that supports S/PDIF, DOLBY AC-3 and DTS on a 75 ohm coaxial connection.

WE-BB

 

Use With:
AD-16X, BIG BEN,

DA-16X,
ROSETTA 200,

ROSETTA 800

 

Available in the

Apogee Store>

CABLE: BNC
FORMAT: Word Clock

 

Description:
Provides 75 ohm Word Clock input/output connection using Apogee’s acclaimed Wyde Eye cable in the BNC-BNC configuration. This cable provides the word clock signal to synchronize to and from other units that provide word clock, such as the Apogee Big Ben.

Application:
For any 75 ohm word clock connection between digital audio devices.

WE-XX

 

Use With:
AD-16X, BIG BEN,

DA-16X,
Mini-DAC, ROSETTA 200, ROSETTA 800

 

Available in the

Apogee Store>

CABLE: AES/XLR
FORMAT:Analog Mic/Line In/Out
FORMAT:AES/EBU In/Out

 

Description:
ANALOG: Balanced 110 Ohm Wyde Eye AD connection for 1 channel of balanced analog audio input. Wyde Eye is designed for digital audio and is excellent for analog signals, which are lower bandwidth offering very low loss, even with low mic level signals.

AES: Dual shielded and balanced 110 Ohm AES/EBU* using Apogee’s acclaimed Wyde-Eye cable for connection of 2 channels of digital I/O and clock signals

Application:
Any digital device connection that supports AES/EBU*.

Any analog device connection using
balanced XLR connectors.

 

 

 

Apogee Breakout Cable

A number of specialized breakout and interface cables are available from Apogee. These are typically designed for our converter products in which multiway connectors are used to get a large number of inputs or outputs into a single connector. At the other end of the cable, usually 1m in length, will be standard connectors, such as XLRs.  

 

AD8-IFC



Use With:
AD-16X, ROSETTA 800

 

Available in the

Apogee Store>

FORMAT: Analog In

 

Description:
Eight channel analog input connection with 8 Neutrik XLR female connectors to a DB-25 multipin connector with a metal shell for improved grounding and RF rejection. All 8 channels are wired balanced as per the Tascam analog wiring standard. Thumb screws are 2.6mm.

Application:
Provides 8 analog XLR inputs to a DB-25 multipin connector for Rosetta 800, AD-16X and any other device that supports the Tascam analog wiring format.

DA8-IFC



Use With:
DA-16X, ROSETTA 800

 

Available in the

Apogee Store>

FORMAT: Analog Out


Description:
Eight channel analog output connection with 8 Neutrik XLR male connectors to a DB-25 multipin connector with a metal shell for improved grounding and RF rejection. All 8 channels are wi red balanced as per the Tascam analog wiring standard. Thumb screws are 2.6mm.

Application:
Provides 8 analog XLR outputs from a DB-25 multipin connector for Rosetta 800, DA-16X and any other device that supports the Tascam analog wiring format.

AES8-IFC



Use With:
ROSETTA 800

FORMAT:AES/EBU In/Out

 

Description:
Eight channels of AES/EBU* input/output connection with 4 Neutrik XLR male and 4 Neutrik XLR female connectors to a DB-25 multipin connector with a metal shell for improved grounding and RF rejection. This cable provides 8 channels of AES input and output as per the AES standard. Thumb screws are 2.6mm

Application:
Provides 4 AES/EBU* XLR inputs and 4 AES/EBU* XLR outputs to a DB-25 multipin connector for Rosetta 800 and any other device that supports the Yamaha 8 channel digital I/O wiring format.

AD16-AES-IFC



Use With:
AD-16X

FORMAT:AES/EBU In/Out

 

Description:
Sixteen channel AES/EBU* output connection with 8 Neutrik XLR male connectors to a DB-25 multipin connector with a metal shell for improved grounding and RF rejection. This cable provides 16 channels of AES output as per the AES standard.Thumb screws are 2.6mm.

Application:
Provides 8 AES/EBU* XLR outputs to a DB-25 multipin connector for AD-16X. Provides 16 channels of AES/EBU output.

DA16-AES-IFC



Use With:
DA-16X

FORMAT:AES/EBU In/Out

 

Description:
Sixteen channel AES/EBU* input connection with 8 Neutrik XLR female connectors to a DB-25 multipin connector with a metal shell for improved grounding and RF rejection. This cable provides 16 channels of AES input as per the AES standard. Thumb screws are 2.6mm.

Application:
Provides 8 AES/EBU* XLR inputs to a DB-25 multipin connector for DA-16X. Provides 16 channels of AES/EBU input.
Features
CD-R Feature

Now Available in the
Apogee Store>