Cable: 1m, FireWire 400 to 800 (6 pin to 9 pin)
Format: FireWire
Description:
FireWire 400 to 800 cable specially constructed to match Duet’s breakout cable and meet Apogee’s high, data integrity standards. This custom cable allows for transfer rates up to 400 Mbps and meets IEEE-1394 specifications. Ideal for connecting Duet, Ensemble or other FireWire 400 peripherals to a FireWire 800 port on your Mac.
Plug-and-play installation from any 9-pin to 6-pin port
Foil plus braid shield provides maximum protection against EMI/RFI
Critical connections are Teflon insulated
Molded ends, featuring Apogee logo, provide durability and increased strength at cable entry point
Length,1m
Color, white
Diameter, 3mm
Application:
Connection of any FireWire 400 peripheral to a FireWire 800 port.
Format: Analog Mic/Line In/Out
Format: AES/EBU In/Out
Description:
ANALOG: Balanced 110 Ohm Wyde Eye AD connection for 1 channel of ced analog audio input. Wyde Eye is designed for digital audio and is exbalancellent for analog signals, which are lower bandwidth offering very low loss, even with low mic level signals.
AES: Dual shielded and balanced 110 Ohm AES/EBU* using Apogee’s acclaimed Wyde-Eye cable for connection of 2 channels of digital I/O and clock signals.
Application:
Any digital device connection that supports AES/EBU*.
Any analog device connection using
balanced XLR connectors.
Provides 75 ohm Word Clock input/output connection using Apogee’s acclaimed Wyde Eye cable in the BNC-BNC configuration. This cable provides the word clock signal to synchronize to and from other units that provide word clock, such as the Apogee Big Ben.
Application:
For any 75 ohm word clock connection between digital audio devices.
Coaxial 75 Ohm S/PDIF connection using Apogee’s acclaimed Wyde Eye cable for 2 channels of digital I/O and clock signals. S/PDIF supports 2 channels of digital audio at sample rates up to 192kHz.
Application:
Any digital device connection that supports S/PDIF, DOLBY AC-3 and DTS on a 75 ohm coaxial connection
