Getting started with Symphony I/O Mk II Thunderbolt and Logic Pro X
In this tutorial, we’ll show you how to setup Apogee Symphony I/O Mk II Thunderbolt with Logic Pro X. To follow this tutorial, you will need to have Symphony I/O connected and installed…along with the latest version of Logic Pro X.
- STEP 1: Open Logic and create a new session. Select empty project.
- STEP 2: Click on “Details”, now click on the arrow next to “Input Device”…a new Window will appear.
- STEP 3: For output device, select “Symphony I/O Thunderbolt”. Input device will automatically change to Symphony I/O Thunderbolt as well.
- STEP 4: Set the buffer to 64. For best latency, you can set the buffer lower but you may need to adjust the buffer higher depending on the size of the project you’re working on.
- STEP 5: Click “Apply Changes”
- STEP 6: Under the “General” tab (in the preferences window), make sure “Software Monitoring” is selected and close the preferences window.
- STEP 7: Under input, select the Symphony input that you’ll be using to record on your first channel.
- STEP 8: Now select the output you’ll be using. The input and output can always be changed later in Logic.
- If you would like to change the sample rate of the session, go to the “Record” tab and choose “Recording Settings”. Now select the audio tab and choose your sample rate. Symphony I/O will change to whatever the session’s sample rate is set to.
- STEP 9: After selecting the input you wish to use, make sure your headphones or speakers are connected and the output level is setup properly, following the Symphony I/O QuickStart Guide: apogeedigital.com/support/symphony-io-mk-ii#tab-id-2
- STEP 10: Make sure record enable is select on the track you would like to record on, adjust your levels and record.
Get answers now in the
Have a Question?
Ask an Apogee Expert
Find a Dealer with the
Apogee Dealer Locator