Home BOOM
Apogee Boom audio interface
Apogee Boom audio interface
Apogee Boom audio interface
Apogee Boom audio interface
Apogee Boom audio interface
Apogee Boom audio interface
Apogee Boom audio interface
Apogee Boom audio interface
Apogee Boom audio interface
Apogee Boom audio interface

BOOM

$224.00

Start Sounding Pro

Ready to start recording music like a pro? BOOM features legendary Apogee sound quality and onboard DSP so you can engineer your own projects, at the most affordable price ever.

  • Onboard Processing (EQ, Compression, Drive)

  • Legendary Apogee conversion

  • Studio-grade Headphone Amp

  • iOS, Mac, & Windows Compatible

BOOM

Sound Amazing with BOOM

Rise Above the Noise

BOOM’s preamp can power the most demanding mics with up to 62dB of clean, noiseless gain — letting your tracks stand out.

Woman singing into microphone and pointing at it

Listen in Hi-Fi

BOOM’s studio-grade headphone amp and DAC will power anything from in-ear monitors to high impedance headphones with clarity, dynamics, and a balanced frequency response.

Man listening to music on headphones

Build The Perfect Stream

Using the Apogee Control mixer, you can blend and tune your analog inputs with audio from Twitch, Spotify playlists, your DAW, and more – all at the same time.

Apogee BOOM on studio desk with iMac and microphone

Rich Analog Tone

Add the warmth and grit of analog gear to your voice and instruments while you record with Symphony ECS Channel Strip. This onboard DSP FX plugin offers 3-band EQ, drive, and a compressor tuned by legendary mix engineer, Bob Clearmountain.

Man using laptop touch screen to use Symphony ECS Channel Strip

Specification

Highlights

Compatibility

Bundled Software

In The Box

Specification

  • Best-in-class Apogee conversion and mic preamp technology
  • Bus powered
  • Up to 24 bit / 192kHz recording
  • Low profile design with aluminum body
  • On-board hardware DSP for low-latency recording with Apogee FX
  • 1x ¼” Instrument input
  • 1x Combi mic/line/instrument input
  • 2x ¼” Balanced outputs
  • 1/4” Headphone output

*All iPads with an USB-C port are compatible with BOOM.
Devices with a Lightning port require the camera connection kit and a powered USB-A hub.

SPECIAL OFFERS*

*All offers require registration of new BOOM on Apogee website

  • BOOM
  • USB Type C / Type A cable

MIC PRE

  • EIN: 123dB (a-weighted) @ 62dB, 150 Ohm input
  • Max Input Level: +18dBu
  • Input Impedance: 2.4KOhm

 

HI-Z

  • Max input level: 14dBu
  • Input Impedance: 3.2kOhm (Pad on), 1MOhm (Pad off)

 

A/D CONVERSION

  • Max input level +4dBu: +18dBu
  • Max input level (-10dBV ref): +6dBV
  • Input impedance: 6.4KOhm
  • Freq resp 20 Hz -20Khz: > +/-0.2dB (@44.1Khz)
  • Rel. THD + N: -101dB
  • Dyn. Range: 122dB (A-weighted)

 

D/A CONVERSION

  • Max output level (+4dBu ref): +15dBu
  • Line output impedance: 100 Ohm
  • Freq resp 20Hz -20 Khz: > +/- 0.05dB
  • Rel. THD+N : -107dB
  • Dyn Range: 114dB (A-weighted)

 

HEADPHONE OUT

  • Max output level headphones: 15dBu / 240mW@ 32 ohms
  • Headphone output impedance 0.5 Ohm
  • Freq resp 20Hz -20 Khz: > +/- 0.05dB
  • Rel. THD+N : -107dB
  • Dyn Range: 114dB (A-weighted)

 

PRODUCT SIZE

User Guide PDF (4.94 MB)

Drew Kapner & Damian Hudson Recording With BOOM

Can you connect BOOM to iOS devices (iPhone, iPad, etc.)? arrow down

Yes! Thanks to the Apogee Control 2 iOS app you can easily record with BOOM on any iOS device.

Does BOOM require external power? arrow down

No. BOOM is USB-Bus Powered.

What plugin can you run BOOM’s onboard DSP? arrow down

BOOM runs the Symphony ECS Channel Strip which gives you a 3-Band EQ, Compressor, and Drive knob to shape your recordings.

Can Boom’s Headphone Output power high impedance headphones? arrow down

Yes, Boom’s headphone output is designed to drive both high and low impedance headphones optimally.

No additional headphone amp would be required to power high impedance headphones.

We recommend using headphones with higher impedances (50 Ohms and higher) for the best audio quality.